Sale!

Hornby DCC TTS Sound Decoder – Merchant Navy Class (Unrebuilt)

£41.99 £36.49

The Hornby TTS (Twin Track Sound) decoder offers a great alternative for those modellers that would like to add sound, but at a more affordable price…

Out of stock

SKU: R8115 Categories: , EAN/Barcode: 5055286647970

Description

The Hornby TTS (Twin Track Sound) decoder offers a great alternative for those modellers that would like to add sound, but at a more affordable price.

The TTS decoder offers a minimum of 16 realistic sound functions, with many specific to the chosen model. These can include whistles, horns, start-up, idle, cold start, In motion sounds and many more. The decoder also possesses all of the features attributed to our popular R8249 decoder.

Function list

F0 Headlight/rearlight
F1 Steam/ Steam exhaust
F2 Whistle long
F3 Whistle medium
F4 Whistle short
F5 Whistle very short
F6 Wheel slip
F7 Coal shovelling
F8 Blow down
F9 Safety valve
F10 Injector
F11 Cylinder cock
F12 Brake
F13 Blower
F14 Guard’s whistle
F15 Coupler clank
F16 Fireman’s breakfast
F17 Sound: chuffing/coasting
F18 Aux lighting
F19 Whistle long alternate
F20 Whistle passing
F21 Whistle medium alternative
F22 Whistle short alternate

– Supports short and long decoder addresses
– Adjustable acceleration and deceleration
– Back EMF load compensation
– Up to 19 controllable spot sounds dependent on model including whistles or horns etc
– Two sound channels allowing for simultaneous play of full locomotive engine sounds, & individual spot sounds e.g. horns, whistles, brakes, wagons coupling etc. NOTE: Only one spot sound can be played at the same time
– It is possible to alter the volume of each sound through an individual dedicated CV. Range 0-8
– Decoder is equipped to support directional front and rear lighting operation via F0 on the controller, providing that the product is fitted with lights
– The decoder is equipped with 1 aux function output controlled by F18 or F25 dependent on locomotive type (diesel or steam)
– Motor current – maximum continuous 500mA
– Motor current – peak 1amp (no function load)
– Function output current maximum—100mA (unprotected)
– Decoder current maximum continuous – 800mA (shared motor and functions)
– Number of sound channels – 2
– Termination – 8 pin plug NEM652. NMRA

The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive’s motor may be controlled under DC operation.

Additional information

Weight 0.1 kg
Power type

Digital

Reviews

There are no reviews yet.

Be the first to review “Hornby DCC TTS Sound Decoder – Merchant Navy Class (Unrebuilt)”

Your email address will not be published. Required fields are marked *