Hornby Hammant and Morgan HM2000 Train Controller instructions (R8012)
The 23VA transformer has three independent, secondary windings, two of which provide the two isolated, pulsed DC, controlled outputs for train operation. The third isolated output supplies the AC and DC Auxiliary outputs for the operation of remote controlled points and other accessories.
Each separate output winding is protected by a poly-switch safety cut-out which will shut down the individual outputs under overheating or short circuit conditions. The transformer is ultimately protected by an internal thermal fuse which will destruct in an extreme overheating situation.
The controlled DC outputs have variable power control, providing compensation for varying loads and have a maximum current capacity of 530mA each. The AC and DC auxiliary outputs share a maximum current capacity of 300mA.
Please note this is only intended as a replacement manual for your existing controller. For more help and advice, please contact us.